Alarm Projects

Twitter Burglar Alarm

Twitter Burglar Alarm is a burglar alarm that tweets when an intruder enters the house.This project controlled by Arduino which is a simple embedded board with an AVR processor.If it sees that the Intruder alert signal is being asserted at the alarm panel, it generates notifications in the form of an SMS and a Twitter status update

GSM SMS Alarm

Cell phone is not only used for communication.SMS alarm is a very simple device. This projectย�uses Siemens gsm phone to send SMS and it has 5 inputs – it means that it can send 5 different SMS messages. For each sensor input we write SMS text that we wish to receive when alarm condition happens. Programing is done via PC and proper software that is available for download on this website

Fake Car Alarm

Here is a simple theft detterant which may be just as effective. The idea is to have a flashing red led indicate that your car is protected. This device can protect your vehicle from potential thieves – it makes it look like your car has an armed alarm system installed, which causes thieves to pass by your car in search of an easier target.

Doorknob touch alarm

The circuit contains a few basic elements, an flip-flop based oscillator, a set of delays, a flip-flop as a sensor, and the audible alarm.The circuit consists of three parts : oscillator ,sensor and audible driver.

PIC12C508 based Simple Alarm System

This is a car alarm system based on PIC 12C508.This system is a perfect solution for unidirectional remote keyless entry systems and access control systems. This Alarm Sytem is based on two PIC12C508 (one is used in transmitter and the other one in the main unit). The following PICs are supported: 12c508, 12c509, 12c508a, 12c509a, 12ce518, 12ce519, 12f508, 12f509, 16f84 and 16f84a. Transmitter uses infra red beam to send code name to main unit